Similar to Joncryl 90 High Glossy Styrene-acrylic Copolymer Emulsion BAW-90R for printing ink
Description:
Styrene-acrylic Copolymer Emulsion BAW-90R is a non-film forming-Rigid Styrene - Acrylic copolymer emulsion, is specifically designed for water-varnished and printing ink. Use this product in the preparation of the varnish has a faster drying speed and high gloss, outstanding performance in the anti-water-resistant and adhesive resistance, it also has a good compatibility with common acrylic polymer in the market. Since this product can’t film-forming by itself, it must be used with the appropriate coalescing agents or with the small particle size film-acrylic acid emulsion, such as our products BAW-27R,BAW-34R,BAW-48R,BAW-148R,BAW-50R and so on. In addition, the product has a good wet ability in the letterpress and gravure.
Features & Benefits:
1. Excellent glossy.
2. Extraordinary wet ability for the pigment
3. Fast drying speed
4. Outstanding water and adhesive resistance, after the printing surface become dry, glossy still preserved.
5. Good brush ability and abrasion resistance
6. Has a good compatibility with other water based resin prevailing in the market
7. Low odor
Application:
1. water-based overprint varnishes
2. Water-based gravure and letterpress ink
3. Water-based plastics ink
4. All kind of water-based varnish and high-grade water-based ink
Specification:
| Appearance | Translucent milky white |
| solid content | 45±1 |
| Viscosity at 25℃,cps(Brookfield, LVT No.4,60 RPM ) | 1000-1500 |
| PH | 8.0-9.0 |
| Density G/L | 1.02-1.05 |
| Um | 0.20-0.30 |
| Tg | 110 |
Packing: 200 kgs net per plastic drums.
Store: Keep containers closed,avoid exposure to heat source or freezing,use it in six month if possible, the store temperature should between 10 and 35℃.
Packing image:
Product Tags:
|
|
Similar To Joncryl 90 High Glossy Styrene Acrylic Copolymer Emulsion BAW-90R For Printing Ink Images
|
